Shenzhen Optostar Optoelectronics Co. Ltd

Model Number: OP-MX-16E1+4GE -M1-3-#4731 Brand Name: OPTOSTAR Key Specifications/Special Features: Specifications:Fiber multiplexer with RJ45 connector provides 16 E1 transparent transmissionProvides 4 x 1000m line Ethernet channel, supports mutual negotiate, Ethernet bandwidth is set on base on multiple of 32KProvides one hotline channel for optionalRate of optical port is 155Mbps, transmission range can reach 25, 40, 60, 80 or 120km

E1 interface code is HDB3, E1 vibration characteristic conforms to ITU-T G.703, G.823 and G.742

Ethernet port supports full/half duplex, 10/100/1,000m auto-adaptable

Ethernet port supports VLAN function and has division mode for user selection

Ethernet package size supports 1916 bytes and 4 Ethernet ports can be set separately

Complete alarm function and can monitor remote device status

Supports E1 loop from remote so as to detect and manage device conveniently

Fiber multiplexer voltage: 220V AC and -48V DC for redundant

Environment requirement:

• Operating temperature: 0 to 50°C
• Storagetemperature: -40 to 85°C
• Relative humidity: 95% RH

Power supply:

• 220V AC: 165 to 250V AC
• -48V DC: -72 to -36V
• Consumption: ≤5W

Fiber multiplexer RJ45 connector E1 interface:

• Interface code: HDB3 code
• Line speed: 2.048Mbps, ±50ppm
• Interface standard: ITU-T G703
• Interface impedance: 75Ω/unbalanced (BNC) or 120Ω/balanced, RJ45
• Allowed attenuation: 0 to 6dBm

10/100/10,000Base-T ports:

• Rate: 10/100/1000m, full/duplex auto-negotiation
• Protocol: supports IEEE802.3 and IEEE802.1Q (VLAN)
• MAC address entries: 4096 entries
• Connector: RJ45

RS232 console ports:

• RJ45 connector rate: 9600kbps (asynchronous)
• Interface characteristic: satisfies ITU-T V.24 standard
• Connector: RJ45

Fiber interface:

• Optical wavelength:
  • 1310 or 1550nm for single-mode optic interface for optional
  • 850 or 1,310nm for multi-mode optic interface for optional
• Optical interface: SC/FC/ST for optional
• Sending consumption: -9/-5dBm